CCHKF - ECW-104 W/B EPOXY CURING PRIMER SOLUTION
- MSDS: CCHKF
- Manufacturer: THE DEXTER CORP
- Product Name: ECW-104 W/B EPOXY CURING PRIMER SOLUTION
- National Stock Number: 8010-00D004808
Product Identification
Product ID:ECW-104 W/B EPOXY CURING PRIMER SOLUTION
MSDS Date:10/24/1995
FSC:8010
NIIN:00D004808
Kit Part:Y
MSDS Number: CCHKF
Responsible Party
WAUKEGAN, IL 60085
US
Emergency Phone: 708-623-4200
Info Phone: 708-623-4200
Cage: 0KZ46
Contractor
Telephone: 800-669-0053
Cage: 0KZ46
Ingredients
DIETHYLTOLUENEDIAMINE
CAS: 68479-98-1
Fraction By Weight: < 10%
DIMETHYL AMINE SUBSTITUTED PHENOL
Fraction By Weight: < 10%
ETHYLENE GLYCOL MONOPROPYL ETHER,
CAS: 2807-30-9
RTECS: KM2800000
Fraction By Weight: 10-20%
N-PROPYL ALCOHOL
CAS: 71-23-8
RTECS: UH8225000
Fraction By Weight: 20-30%
OSHA PEL 200 PPM
ACGIH TLV: S,200PPM/250STEL; 96
Hazards
LD50 LC50 Mixture:NOT GIVEN FOR PRODUCT AS A WHOLE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION MAY CAUSE IRRITATION OF THE
RESPIRATORY TRACT, HEADACHE, DIZZINESS, DROWSINESS. MAY IRRITATE
EYES AND SKIN.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:RESPIRATORY TRACT IRRITATION, HEADACHE,
DIZZINESS, DROWSINESS, EYE IRRITATION, SKIN IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. DRINK WATER.
GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:SCC
Flash Point:92.0F,33.3C
Lower Limits:1.26 %
Upper Limits:NOT GIVEN
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR. COOL TANKS AND
CONTAINERS EXPOSED TO FIRE WITH WATER.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. CLOSED
CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. APPLICATION TO
HOT SURFACES REQUIRES SPECIAL PRECAUTIONS.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID BREATING
VAPORS, VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT TAKE INTERNALLY. CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES.
Other Precautions:MAKE SURE DRUM IS COMPLETELY EMPTY BEFORE ATTEMPTING
TO BRAZE OR WELD. THE DRUM SHOULD BE INDUSTRIALLY CLEANED PRIOR TO
REUSE. DO NOT FLAME CUT, BRAZE OR WELD WITHOUT A NIOSH APPROVED
RESPIRATOR OR AP PROPRIATE VENTILATION.
Exposure Controls
Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATION
EXPOSURE LIMITS USE A NIOSH-APPROVED RESPIRATOR TO PREVENT
OVEREXPOSURE. IN ACCORD WITH 29 CFR 1910.134 USE EITHER AN
ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AI R-PURIFYING RESPIRATOR.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:CHMEICAL RESISTANT
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES W/SIDES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
KEY1:F4.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:207F,97C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:> 1
Spec Gravity:< 1
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NOT GIVEN
Appearance and Odor:NOT GIVEN
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, OPEN FLAMES
Hazardous Decomposition Products:CARBON MONOXIDE, OXIDES OF NITROGEN
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.